Standard accessories for BERNINA 790 PLUS Crystal Edition

Programmable Foot control

Via the foot control the machine is started and stopped. The speed of the machine is also controlled via the foot control.

Power cable

The power cable connects the machine with the power supply system.

Brush

The brush is used to clean the feed dog and the hook area.

Angular Torx wrench

Using the angular Torx wrench the headframe can be opened.

Screwdriver red

The red screwdriver is supplied as an all-round tool.

Screwdriver Torx, gray

Use the gray screwdriver Torx to change the needles.

Selection of needles

The needle assortment contains different versions and sizes of needles for all the common applications.

Height compensation tool

The height compensation tool levels an angled position of the presser foot sole when sliding over thick seams.

Seam ripper

The seam ripper is an indispensable tool to undo stitches or to cut buttonholes open.

2 Foam pads

The foam pad prevents the thread from getting hooked at the spool pin.

4 Bobbins in the accessory, 1 bobbin in the bobbin case

The bobbins are filled with the lower thread.

3 Spool discs

Spool discs hold the thread spool in place for proper release of thread from the spool.

Soft Cover with pocket

The soft cover protects from dust and contamination.

Seam guide, right

To align regular seam distances.

Note:
Not all models and accessories are available in all countries. We reserve the right to make changes in both features and design.