BERNINA WiFi Device

BERNINA WiFi Device

Connect your world

  • Made for BERNINA Embroidery Software 9
  • Transfer embroidery designs wirelessly
  • Send designs from multiple PCs
  • Send designs to multiple embroidery machines

Connect your world with the BERNINA WiFi Device

Send your design to the machine

Send your design to the machine

  • A single click and that's it!
  • Thanks to the WiFi Connector
  • Wireless transfer of designs

The BERNINA WiFi Connector is developed to wirelessly transfer your embroidery designs. This seamless process enables you to do all your creating on the computer and then send it to your embroidery machine for stitching. Whenever your embroidery design is ready for stitching out, you just start the process with a click.

Learn more
Send designs to multiple machines

Send designs to multiple machines

  • By purchasing more WiFi Devices
  • Or send designs from multiple PCs
  • The WiFi Device makes it all convenient

The BERNINA Connector software is installed together with your BERNINA Embroidery Software 9 which is purchased separately. You can also send designs from multiple PCs via one main PC running the BERNINA WiFi Connector. You have several embroidery machines? No problem, because additional WiFi devices can be purchased.

Learn more
Minimum requirements

Minimum requirements

For best performance of the WiFi Device please verify that your BERNINA embroidery machine has the latest firmware installed.

Tutorials

Support

Help and Support page V9

Learn more about the software and its possibilities by browsing through the help and support page with its variety of content:

  • Download manuals & useful documents
  • Watch many tutorial videos
  • Read about the different functions
  • Search and filter for key words
  • And much more
Take me to the help page

Frequently Asked Questions

Setup Wizard does not display your WiFi network

During WiFi Device setup your WiFi network is not visible.

Possible solutions:
  1. Make sure the selected WiFi connection is 2.4 GHz. See also the 'How To check frequency EN.pdf' document.
  2. Close the setup wizard, wait a few seconds, restart the setup wizard.
  3. Try moving the Device somewhere else in range of the network.
Even if your computer can see the WiFi network, the device may not be able to because the WiFi module doesn't have the same range.


 

Designs are not found on the machine

After WiFi Device setup:
    -The power LED is solid green
    -The WiFi LED is solid blue
    -The Devic state indicator LED is solid green

Try the different settings available in the BERNINA WiFi Connector - Advanced Settings.
We recommend to test one after the other.
Keep the WiFi Device connected to the machine to test the different settings.
The 'Serial interface' settings needs to be activated again if for some reason you want to connect the WiFi Device to a computer. For example to setup on a different computer.
Be ware that changing memory size or emulation mode in the advanced settings will delete all designs saved on the device.
 

 

Cannot send designs to the WiFi Device

After WiFi Device setup:
    - The power LED is solid green
    - The WiFi LED is blinking blue (fast)
    - Designs cannot be sent to the WiFi Device

Possible solution:

Start the BERNINA WiFi Connector on one PC in the same network as the WiFi Device.
See the document 'How to check same network.pdf'.


   

WiFi Device will not connect

After WiFi Device Setup:
    -The power LED is solid green
    -The WiFi LED is blinking blue
    -The state indicator is not lit

Possible solutions:
1. Make sure you are using the correct password for your Router or Access Point.
See also How To find WiFi password EN.pdf'. With the WiFi Device plugged to your computer and WiFi LED blinking, enter the password again under 'Configure selected - WiFi Settings'. Use the 'Show password' toggle to make sure it is entered correctly.
    
2. Do a factory reset of your WiFi Device.
Keep the reset button pressed until the state indicator turns white. See also Reset the device.
    
 3. Make sure your Router and/or Access Point allow communication between devices. Please refer to the reference manual of your Router and/or Access Point for this.

Get your WiFi Device

Being an embroiderer, a maker, a creator is serious business. When it’s time to make, your creativity deserves the support of a great device.

Purchase at your local BERNINA Dealer