Standard accessories for BERNINA 990

#
Spool Stabilizer
To suppoert large spools on the vertical spool holder. To avoid vibrations from the spool.
#
Foam Pad (4x)
The foam pad prevents the thread from slipping, tangling or breaking on the spool pin.
#
Sewing Thread Set
Contains a set of threads for sewing.
#
Power cable
The power cable connects the machine with the power supply system.
#
Programmable Foot control
Via the foot control the machine is started and stopped. The speed of the machine is also controlled via the foot control.
#
Net for thread spool, white
The spool net provides an even unwinding of the thread when using slippery embroidery threads.
#
Bobbins (Set of 5)
To wind the bobbin thread.
#
Height compensation tool
The height compensation tool levels an angled position of the presser foot sole when sliding over thick seams.
#
Seam ripper
The seam ripper is an indispensable tool to ando stitches or to cut buttonholes open.
#
Seam guide, right
To align regular seam distances.
#
Selection of needles
The needle assortment contains different versions and sizes of needles for all the common applications.
#
Brush
The brush is used to clean the feed dog and the hook area.
#
Screwdriver red
The red screwdriver is supplied as an all-round tool.
#
Screwdriver Torx, gray
Use the gray screwdriver Torx to change the needles.
#
Embroidery needle assortment SUK
Various needle sizes for embroidering.
#
Dust Cover
To protect the machine from dust and contamination.
#
Spool Cap D12
Secures the thread spool in place and allows it to unwind consistently while sewing.
#
Spool Cap D27
Secures the thread spool in place and allows it to unwind consistently while sewing.
#
Spool Cap D43
Secures the thread spool in place and allows it to unwind consistently while sewing.
#
9 mm Stitch Plate
The supplied 9-mm Stitch Plate is suitable for most sewing applications
#
Dust Cover for Embroidery Module
To protect the Embroidery Module from dust and contamination.
#
Template holder
The template holders serve as a help when placing and removing the template in and from the embroidery hoop.
#
4x Fabric Clamp
For fixing the fabric to the outer frame of the Giant Hoop.
#
Embroidery Thread Set
For embroidering.
Note:
Not all models and accessories are available in all countries. We reserve the right to make changes in both features and design.