Standard accessories for BERNINA 880 PLUS

#
Programmable Foot control
Via the foot control the machine is started and stopped. The speed of the machine is also controlled via the foot control.
#
Soft Cover with pocket
The soft cover protects from dust and contamination.
#
Power cable
The power cable connects the machine with the power supply system.
#
Bobbins (one of them in the sewing computer)
The bobbins are filled with the lower thread.
#
Manual threader
Threading is much easier with the threading aid.
#
Wire threader for threading cording for bobbin play
The wire threader makes it easy to thread cords through the bobbin case for bobbin work.
#
Tweezers
Removing thread remainders or threading at difficult sites - all in the blink of an eye with the BERNINA tweezers.
#
2 nets
The spool net provides an even unwinding of the thread when using slippery embroidery threads.
#
Screwdriver Torx, gray
Use the gray screwdriver Torx to change the needles.
#
Magnifying glass adapter/Spool Holder
The practical Magnifying-lens set enhances your view of the working area. The three lenses have magnification factors of 1.25, 1.5 and 2, making it easier to thread the needle and sew tricky areas. The set can also be used with a hand holder as a practical reading lens.
#
Seam ripper
The seam ripper is an indispensable tool to undo stitches or to cut buttonholes open.
#
Brush
The brush is used to clean the feed dog and the hook area.
#
Multifunction tool
The multifunction tool is used for opening the service cover, inserting the needle and the setting of the underthreaded tension.
#
Spool Disc small
Spool discs hold the thread spool in place for proper release of thread from the spool.
#
Holder for king-size spools, cone holder
The stabilizer cone prevents the vibration of spools and cones of different sizes at slow and fast sewing speed.
#
Height compensation tool
The height compensation tool levels an angled position of the presser foot sole when sliding over thick seams.
#
Selection of needles
The needle assortment contains different versions and sizes of needles for all the common applications.
#
Monitoring mirror
To control the threading of the bobbin thread.
#
Hook cleaning tool
Used for cleaning the bobbincase area.
#
Thread-Guide-and-Lubricating Unit
The Thread Lubrication Unit helps guide metallic or difficult threads by coating the thread in silicon fluid before entering the tension unit.

Standard accessories for BERNINA 880 PLUS

#
4 Bobbins in the accessory, 1 bobbin in the bobbin case
The bobbins are filled with the lower thread.
#
2 Foam pads
The foam pad prevents the thread from getting hooked at the spool pin.
#
Selection of needles
The needle assortment contains different versions and sizes of needles for all the common applications.
#
Soft Cover with pocket
The soft cover protects from dust and contamination.
#
3 Spool discs
Spool discs hold the thread spool in place for proper release of thread from the spool.
#
Screwdriver red
The red screwdriver is supplied as an all-round tool.
#
Brush
The brush is used to clean the feed dog and the hook area.
#
Seam ripper
The seam ripper is an indispensable tool to undo stitches or to cut buttonholes open.
#
Height compensation tool
The height compensation tool levels an angled position of the presser foot sole when sliding over thick seams.
#
Power cable
The power cable connects the machine with the power supply system.
#
Programmable Foot control
Via the foot control the machine is started and stopped. The speed of the machine is also controlled via the foot control.
Note:
Not all models and accessories are available in all countries. We reserve the right to make changes in both features and design.